8 Item(s)

Grid  List 

Set Descending Direction
  1. Rule Automatic Bilge Pump

    Electronic operation on the principle of impeller resistance. Float switches are not required. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. Thereafter, it will check for water every 2-1/2 minutes. Power use in the checking mode is minimal. Learn More

    Starting at: £60.06

  2. Rule Bilge Alarms

    This device consists of a Rule-A-Matic Plus float switch with an alarm module. It warns of high water levels in the bilge using both a visual and an 85dB audible alarm. Max switching current: 20A, Gauge Diameter: 60mm Learn More

    Starting at: £61.34

  3. Rule Eco Switch

    The Rule ECO-Switch is an ecologically sound automatic bilge pump control control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached to switch. This air pressure activates the switch which controls your pump. There are no moving internal parts, all wiring is out of the water, and there are no submerged electrical connections at all. Offering complete reliability and outstanding performance, the Rule ECO-Switch offers a viable alternative to traditional float switches. Available in both 12v and 24v DC models. Learn More

    Starting at: £46.06

  4. Rule Float Switches

    These switches are designed for automatic bilge pump control without rapid on / off cycling. Learn More

    Starting at: £27.47

  5. RULE LOPRO AUTO 900GPH 12V BILGE PUMP

    Connections: For 19mm (3/4"), 25mm (1") or 28mm (1 1/8") bore hose. Dimensions: 237mm long, 59mm diameter. Current Draw: 4(amps) Fuse Size: 7.5 amp Output: Up to 56 litres/minute (12.5 gallons/minute). Max. recommended discharge head 3m Brings Rule pumping power to tight spaces. Fully rotating discharge body for installation flexibility. Choice of discharge ports supplied with each pump. Ignition protected. Horizontal or Vertical Mounting 3 Operation Modes: High water mode; The pump starts when the water level reaches 50mm (2") Low water mode; Turn the motor cartridge 180º and the sensor is at 33mm (1.3") Full Electronic mode; The pump automatically turns on every 2.5 minutes to check for water, if water is detected the pump runs until the water is gone. Rule LoPro Submersible Bilge Pumps Video Packaged Dimensions: L:30.00 x H:10.00 x W:21.00cm Actual Weight: 0.70 Kg (Approx. 0.95 Kg packed) Learn More
    £55.88 Excl. VAT
  6. Rule Manual Bilge Pumps

    These pumps are totally submersible and ignition protected to all existing safety standards. Cool running motors and stainless steel shafts for long life. Snap lock strainer base for easy installation and removal. Silent, vibration free running. No burn-out if run dry. Learn More

    Starting at: £18.49

  7. Rule Mate Automatic Bilge Pumps

    The Rule-Mate series of Automated Bilge Pumps feature a pump and a non-mercury float switch in a single, compact housing. When the float rises, the pump turns on. There is no on/off cycling and therefore, no power use until the pump comes on. The pump remains on until the float drops and the pump senses no load against the impeller. Learn More

    Starting at: £58.56

  8. Rule Panel Switches

    These switches are designed for use with automatically controlled pumps. 3 positions: OFF / ON / MANUAL. Failsafe feature prevents pump being left on when used manually. Learn More

    Starting at: £22.45

8 Item(s)

Grid  List 

Set Descending Direction
Sample Requests